Q:How does GoDryPowerwork?
A:GoDryPower charges the building structure with positive ions (+) and forces the positive water out/away from the building towards the soil (-)
Q:How do I see that I have problems with damp?
A:Chalk or salt deposits, paint or plaster flakes off, wallpapers peels off.
Q:How long does it take the walls to dry?
A:Four to six weeks.
Q:Is it possible to install the GoDryPower system externally?
Q:Does external installation reduce the effect?
A:No, but the drying time may be somewhat longer.
Q:The granite walls in my basement, can I expect them to dry with GoDryPower?
A:Yes, but there must be concrete between the stones, where Dry Power can get hold and stop the flow.
Q:I have brick walls, can I expect them to dry?
Q:Water is coming in through cracks in the wall; can the GoDryPower system stop this?
A:Cracks must be sealed physically with concrete. GoDryPower can then dry out the structure.
Q:I have water entering the space between the wall and the floor. Can the GoDryPower system stop this?
A:After the leak has been sealed physically, GoDryPower will dry out the structure.
Q:I have Tresonit/Siporex in the walls. Could this create problems?
A:Tresonit and Siporex often make up the inner part of a brick wall. We install the system so that it reaches into the concrete and dries the wall.
Q:Is there any radiation hazard associated with GoDryPower?
A:No, the system only emits low-voltage pulses.
Q:Is the GoDryPower system expensive to operate?
A:The annual electrical consumption of GoDryPower in a normal dwelling of approx. 100 sq. m. is between EUR 5 and 10.
Heider Hof Weg 23a
D-52080 Aachen, Germany
Tel.: +49 (0) 2405 4180 100
Tel.: +49 (0) 2405 4180 131
Tel.: +49 (0) 2405 4180 101
Tel.: +49 (0) 2405 4180 132